Subtopic 4 of 5
8.4Transfer
The idea
Transfer time depends on how much data passes under the head: one full rotation reads a whole track.
Think of it like this: The groove is read at the speed the record spins.
Why it exists
It gives the sustained data rate of the disk.
How it works
- Time per sector = rotation time ÷ sectors per track.
- Data rate = bytes per track × rotations per second.
- Reading k sectors takes k × time per sector.
Worked example: 7200 RPM, 200 sectors of 512 B
Per sector = 8.33 ÷ 200 = 0.0417 ms. Rate = 102,400 B × 120 rot/s ≈ 12.3 MB/s.
Now play with it
- →Change RPM and sectors per track and watch the rate.
Time per sector0.0417 ms
Bytes per track1,02,400
Data rate12.29 MB/s
One full rotation reads one whole track, so rate = bytes per track × rotations per second.
Check yourself
A 7200 RPM disk has 200 sectors per track. Time to read one sector (transfer only)?
Remember: Transfer rate = bytes per track × rotations per second.
Exam notes (the dense version)
One full rotation reads one whole track; so the rate = track capacity × rotations per second.
Previous year questions: Secondary Storage (Disk) (4)
PYQs are grouped by topic, so this is the full set for Secondary Storage (Disk); try the ones that match this subtopic. Open all 4 on the topic page.