← 🔌 I/O Interface, Interrupts & DMA
Subtopic 8 of 8

9.8Serial transfer

The idea

Serial transmission sends bits one after another. In asynchronous mode each character is wrapped with start and stop bits, which costs efficiency.

Think of it like this: Sending a word letter by letter in an envelope with a "begin" and "end" stamp.

Why it exists

Receivers need to find where each character starts and stops without a shared clock.

How it works

  1. Line idles at 1; a start bit (0) wakes the receiver.
  2. Data bits follow, LSB first, then optional parity.
  3. One or two stop bits (1) end the frame.
  4. Efficiency = data bits ÷ total bits per frame.

Worked example: 8 data bits, 1 start, 1 stop, no parity

Frame = 10 bits, efficiency = 80%.

Now play with it

  • →Press Send and watch the frame bits appear; change parity and stop bits.
0
start
1
D0
0
D1
0
D2
0
D3
0
D4
0
D5
1
D6
0
D7
1
stop
Frame length10 bits
Efficiency80 %

Line idles at 1. Start bit (0) wakes the receiver, data goes LSB first, then optional parity, then stop bit(s). Bits shown higher = line high.

Check yourself

8 data bits, 1 start, 1 stop, no parity. Efficiency of the serial link?

Remember: Efficiency = data bits ÷ frame length.
Exam notes (the dense version)

Asynchronous: start bit + data + (parity) + stop bit(s) per character. Synchronous: blocks with sync chars.

Previous year questions: I/O Interface, Interrupts & DMA (8)

PYQs are grouped by topic, so this is the full set for I/O Interface, Interrupts & DMA; try the ones that match this subtopic. Open all 8 on the topic page.