3.6Static hazards
The idea
A static hazard is a brief unwanted pulse (glitch) at the output of a circuit when one input changes and the output is supposed to stay constant. It appears because different paths have different delays.
Think of it like this: Two traffic lights that do not switch at exactly the same moment: for an instant both are red.
Why it exists
GATE asks which expressions have hazards and how to remove them with the consensus term.
How it works
- Find two adjacent 1s on the K-map that are not covered by a common group.
- Change the variable that separates them while the others hold the cover terms at 1.
- The first term turns off a gate delay before the second turns on: the output dips to 0.
- Add the consensus term (a group covering both cells) so the output stays 1.
Worked example: F = AB + A′C with B = C = 1
When A falls, AB turns off one step before A′C turns on, so F glitches to 0. Adding BC keeps F high all the time.
Now play with it
- →Switch between the two circuits and watch row F.
- →Notice that the red cell appears only in the version without BC.
B = C = 1 the whole time and A falls from 1 to 0 at t = 2. Every gate has a delay of one time unit. Logically F stays 1 (the output is B·1 either way).
| signal | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|---|
| A | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| A' | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 |
| AB | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 |
| A'C | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 |
| F | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 1 | 1 |
F dips to 0 for a moment: a static-1 hazard. AB turns off before A′C turns on (the inverter makes A′ late).
Check yourself
The circuit F = AB + A′C can show a static-1 hazard when
Exam notes (the dense version)
A static-1 hazard is a momentary 0 glitch when the output should stay 1; it appears in a two-level SOP when two adjacent 1s on the K-map are covered by different groups (e.g. F = AB + A′C when B = C = 1 and A changes). Fix it by adding the redundant consensus term (BC). A static-0 hazard is the dual in POS. A dynamic hazard is several glitches while the output should change once and needs three or more levels of logic. A fully redundant-free SOP built from all prime implicants is hazard-free for single-input changes.
Previous year questions: Combinational Circuits (10)
PYQs are grouped by topic, so this is the full set for Combinational Circuits; try the ones that match this subtopic. Open all 10 on the topic page.