GA · whole subject on one page

Short notes: General Aptitude: Quant & Reasoning

Every topic in revision form: the key ideas, formulas, the question types GATE asks, and the traps. Read it the night before.

1. % Arithmetic: Percent, Ratio, Averages, Profit

High yield ●●●11 PYQs →

Percentages, ratios, averages and profit and loss are the backbone of the numerical questions. Most are one or two steps once you set up the right quantity.

  • Percentages & successive changes. x% of y = xy/100. Percentage change = (new − old) ÷ old × 100, always relative to the old value. Successive changes of a% and b% multiply: (1 + a/100)(1 + b/100). A rise of 20% then a fall of 20% leaves you at 96%, not 100%. Percentage points are not percent: 40% to 65% is +25 points but +62.5%.
    → Changes multiply. Percentage change is relative to the OLD value. Points are not percent.
  • Ratio, proportion & variation. a : b = c : d means ad = bc. To split N in the ratio a : b : c, divide by the sum of parts. Direct variation: y/x constant. Inverse: xy constant (more men, fewer days). Compound ratio multiplies ratios. A ratio of numbers is not a ratio of values (coins 5 : 3 : 13 of ₹1, ₹5, ₹10 hold money in 5 : 15 : 130).
    → Split by the sum of parts. A ratio of numbers is not a ratio of money.
  • Averages & weighted averages. Average = sum ÷ count. If one item changes by d, the average changes by d ÷ n, so d = n × change (the 2025 problem: +18 raised the mean 0.6, so n = 30). A weighted average multiplies each group average by its size. The average of two groups lies between them, nearer the bigger group.
    → Change in sum = n × change in average.
  • Mixtures & alligation. Mixing a cheaper (c) and a dearer (d) ingredient to get mean price m: quantity of cheaper : dearer = (d − m) : (m − c). The "cross" is the quick form of the weighted average. Repeated replacement: after replacing a fraction f of a full vessel n times, the original liquid left is (1 − f)ⁿ.
    → Cheaper : dearer = (d − m) : (m − c). The mean is closer to the larger quantity.
  • Profit, loss & discount. Profit % = (SP − CP) ÷ CP × 100 (always on cost). Marked price → discount % on the marked price → SP. Successive discounts multiply. Two items sold at the same price with x% profit on one and x% loss on the other always give an overall loss of x²/100 %. Selling at a profit of p% = CP × (1 + p/100).
    → Profit % is on cost. Equal SP, ±x% → loss x²/100 %.
  • Interest & age problems. Simple interest SI = PRT/100 (the same amount every year). Compound A = P(1 + r/100)ⁿ: interest earns interest, so CI > SI after year 1, and CI − SI for 2 years = P(r/100)². Ages: form an equation for each statement, and remember that everyone is older by the same number of years.
    → SI is linear, CI compounds. CI − SI (2 years) = P(r/100)².

Formulas

Percentage change
(new − old) / old × 100; x% of y = xy/100
Successive change
net = (1 + a/100)(1 + b/100) − 1; +x% then −x% gives −x²/100 %
Weighted average
(n₁a₁ + n₂a₂)/(n₁ + n₂); change in sum = n × change in average
Alligation
cheaper : dearer = (d − m) : (m − c)
Profit and loss
P% = (SP − CP)/CP × 100; equal SP with ±x% → loss x²/100 %
Interest
SI = PRT/100; A = P(1 + r/100)ⁿ; CI − SI (2 years) = P(r/100)²
Proportion
direct: y/x = k; inverse: xy = k; split N in a : b → Na/(a + b), Nb/(a + b)

What GATE asks

  • ★★★Find an average or a count from a changed average. Use change in sum = n × change in average.
  • ★★★Ratio and percentage word problems. Pick a convenient total (100 or the sum of parts) and compute each share.
  • ★★★Profit, loss and discount. Percent on cost vs percent on marked price; successive and equal-price cases.
  • ★★★Share, money or inference from percentages. Turn each statement into a fraction of the same total, then compare.

Traps

A percentage of the new value is not the same as a percentage of the old: always divide by the old value.
Percentage points and percent are different: 40% → 65% is +25 points but +62.5%.
Equal-price sale of a 10% gain and a 10% loss is a 1% loss, never break-even.
A ratio of coin counts is not a ratio of money.

2. 🚆 Time, Speed, Distance & Work

High yield ●●●2 PYQs →

Average speed, relative speed and time-and-work appear in many papers as one-step or two-step word problems. The shortcuts matter: harmonic mean, relative speed and rates.

  • Speed, distance, time & average speed. distance = speed × time. Average speed = total distance ÷ total time, never the mean of the speeds. For equal distances at speeds a and b the average is the harmonic mean 2ab/(a + b). For equal times it is the ordinary mean. Convert units first: km/h × 5/18 = m/s.
    → Average speed = total distance / total time. Equal distances: harmonic mean.
  • Relative speed, trains & boats. Moving in opposite directions, speeds add; in the same direction they subtract. Time to meet or overtake = gap ÷ relative speed. A train crossing a pole travels its own length; crossing a platform it travels length + platform. Boat: downstream = b + c, upstream = b − c, so b = (down + up)/2 and c = (down − up)/2.
    → Same direction: subtract. Opposite: add. Time = gap / relative speed.
  • Time & work, pipes & cisterns. If A finishes in a days, A does 1/a of the job per day. Add rates for people working together: time = 1 ÷ (1/a + 1/b). A pipe that fills in x hours has rate 1/x; a leak has a negative rate. Work is proportional to men × days × hours, so more men means fewer days (inverse).
    → Add rates. A leak is negative. Time = 1 / combined rate.
  • Clocks & calendars. The minute hand moves 6° per minute and the hour hand 0.5° per minute, so the angle at h : m is |30h − 5.5m| (take the smaller of the angle and 360° minus it). The hands overlap every 12/11 hours, i.e. about every 65 5/11 minutes. In a calendar, an ordinary year shifts the weekday by 1 and a leap year by 2.
    → Angle = |30h − 5.5m| (smaller side). Overlap every 12/11 hours.

Formulas

Basics
d = v t; km/h × 5/18 = m/s; m/s × 18/5 = km/h
Average speed
total distance / total time; equal distances: 2ab/(a + b)
Relative speed
opposite: v₁ + v₂; same direction: |v₁ − v₂|; time = gap / relative speed
Train
crossing a pole: L/v; crossing a platform: (L + P)/v
Boat
b = (down + up)/2; c = (down − up)/2
Work rate
A takes a days → 1/a per day; together 1/a + 1/b; leak = negative rate
Clock
angle = |30h − 5.5m|; hands overlap every 65 5/11 min

What GATE asks

  • ★★★Average speed over unequal parts of a journey. Total distance over total time; use fractions of the journey as the distances.
  • ★★★Two vehicles starting together or approaching. Relative speed: subtract for the same direction, add for opposite.
  • ★★★Work and cost problems. Cost ∝ rate × time; a rise in wages and fall in hours multiply.

Traps

Averaging two speeds directly (60 and 40 over equal distances gives 48, not 50).
Using the wrong unit: convert km/h and m/s before combining.
A leak or an outlet pipe has a negative rate.
Percent changes in wage and hours multiply: ×6/5 and ×23/24 = ×1.15, not +15%+... added.

3. 🔢 Numbers, Algebra & Series

High yield ●●●27 PYQs →

Number properties, quadratics, logarithms and number series give several one-mark questions that need one clean idea each, and a few two-mark ones that look hard but reduce to an identity.

  • Divisibility, remainders, LCM & HCF. HCF takes the lowest power of each prime, LCM the highest; HCF × LCM = product of two numbers. The smallest number leaving remainder r when divided by several numbers is LCM + r. To make n × y a perfect square or cube, bring every prime exponent up to a multiple of 2 or 3 (162 = 2 × 3⁴ needs y = 4 × 9 = 36 for a cube). Divisibility: 3 and 9 by digit sum, 11 by alternating sum.
    → LCM + r for equal remainders. Cube: every prime exponent a multiple of 3.
  • Number series & patterns. Try in order: differences (constant → arithmetic; differences themselves in a pattern like 3, 5, 7), ratios (2, 12, 60, 240 has ratios 6, 5, 4, 3), squares and cubes, Fibonacci (sum of the previous two), two interleaved series, and letter series (shift each letter by +2, +3, +4). Check the rule on every term before using it.
    → Differences, then ratios, then squares, then Fibonacci, then interleaved.
  • Algebra: equations, quadratics & inequalities. For ax² + bx + c = 0: sum of roots = −b/a, product = c/a, discriminant D = b² − 4ac (D < 0 no real roots). The vertex is at x = −b/2a, the maximum or minimum value is c − b²/4a. To evaluate an expression in a root r, reduce powers using r² = −2r − 6 (the 2022 problem). Inequalities: multiplying by a negative flips the sign; |x| = a gives two roots ±a.
    → Sum = −b/a, product = c/a. Reduce powers with the equation itself.
  • Exponents, logarithms & functions. log(xy) = log x + log y; log(x/y) = log x − log y; log xⁿ = n log x; log_a b = log b ÷ log a. The AM-GM equality case: (x + y)/2 = √(xy) only if x = y. If f(x) = g(y) for all x and y, both are the same constant. An exponential Ae−bL through two points gives b from the ratio of the values.
    → log(pq) = log p + log q; log(p + q) is different. AM = GM ⇒ equal numbers.

Formulas

HCF and LCM
HCF × LCM = a × b; smallest number with remainder r: LCM + r
Perfect powers
every prime exponent must be a multiple of 2 (square) or 3 (cube)
Series checks
differences → ratios → n² or n³ ± c → Fibonacci → interleaved
Quadratic
roots (−b ± √D)/2a; sum −b/a; product c/a; vertex x = −b/2a
Logs
log xy = log x + log y; log x/y = log x − log y; log xⁿ = n log x; log_a b = log b / log a
Identities
(z + 1/z)² = z² + 2 + 1/z²; (a + b)² − (a − b)² = 4ab; min(x, y) = (x + y − |x − y|)/2

What GATE asks

  • ★★★LCM and remainder, or smallest perfect cube or square. LCM + r for equal remainders; fix the prime exponents for a perfect power.
  • ★★★Find the next term of a series. Differences, then ratios, then squares, Fibonacci or interleaved series.
  • ★★★Algebra and logarithm identity questions. Square both sides, substitute a root relation, or use AM-GM equality.
  • ★★★Compare functions or solve an exponential model. Find where one overtakes the other; solve the exponential from two data points.

Traps

A series rule that fits the first four terms may fail the fifth: test every term.
log(x + y) is not log x + log y.
AM-GM equality holds only when the numbers are equal.
After multiplying an inequality by a negative number, reverse its sign.

4. 🎲 Counting & Probability

High yield ●●●10 PYQs →

Permutations, combinations and probability appear almost every year, from "how many arrangements" to dice, balls and Bayes. The method is always count the favourable outcomes and the total, in the same way.

  • Permutations & combinations. Order matters: nPr = n!/(n − r)!. Order does not matter: nCr = n!/(r!(n − r)!). Arrangements of n distinct objects = n!; around a circle = (n − 1)!; of a word with repeated letters = n!/(p! q! ...) (LETTER = 6!/(2!2!) = 180). "At least one" is usually total minus none.
    → Order → nPr. No order → nCr. Divide by factorials for repeats.
  • Repetition, selection & distribution. Choosing k items from n types with repetition and no order: C(n + k − 1, k) (3 scoops from 4 flavours = C(6,3) = 20). This equals the number of non-negative solutions of x₁ + ... + xₙ = k (stars and bars). With each item used at most once it is plain nCk. Handle restrictions by complement or by inclusion-exclusion (24 − 6 − 6 + 2 = 14).
    → Multiset: C(n + k − 1, k). Restrictions: total − bad + both.
  • Basic probability: dice, coins, cards. P(event) = favourable ÷ total, with all outcomes equally likely. List the sample space for two dice (36 cells) and shade the favourable ones. Independent events multiply; mutually exclusive events add. At least one = 1 − P(none). With replacement the probabilities stay the same; without replacement they change after each draw.
    → P = favourable / total. At least one = 1 − none.
  • Conditional probability & Bayes. P(A | B) = P(A and B) ÷ P(B). Bayes: P(cause | evidence) = P(cause) × P(evidence | cause) ÷ P(evidence), where P(evidence) adds all ways it can happen (total probability). A draw that depends on the first draw (an orange ball is replaced, a green one is not) is solved by conditioning on the first outcome.
    → Split by the first outcome, then add the cases.
  • Binomial & repeated trials. In n independent trials with success probability p, P(exactly k successes) = C(n, k) pᵏ (1 − p)ⁿ⁻ᵏ. The most likely number of successes is near np (with p = 2/3 and 7 rolls, five greens is the mode). For "the probability of rolling a six exactly once in three rolls" use C(3,1)(1/6)(5/6)² = 75/216.
    → P(k) = C(n, k) pᵏ qⁿ⁻ᵏ. Mode ≈ np.

Formulas

Permutation and combination
nPr = n!/(n − r)!; nCr = n!/(r!(n − r)!); nCr = nC(n − r)
Circular and repeated letters
circle: (n − 1)!; word: n!/(p! q! ...)
With repetition
k items from n types, no order: C(n + k − 1, k)
Probability rules
P(not A) = 1 − P(A); independent: P(A)P(B); exclusive: P(A) + P(B)
Conditional and Bayes
P(A|B) = P(A ∩ B)/P(B); P(C|E) = P(C)P(E|C) / Σ P(Ci)P(E|Ci)
Binomial
P(k) = C(n, k) pᵏ (1 − p)ⁿ⁻ᵏ

What GATE asks

  • ★★★How many ways to arrange or choose. Decide whether order matters and whether repetition is allowed, then use nPr, nCr or C(n + k − 1, k).
  • ★★★Dice and ball probability. Binomial for repeated independent trials; condition on the first draw when the box changes.
  • ★★★Bayes / conditional probability. Add the probabilities of all ways the evidence can occur, then divide the case you want.
  • ★★★Restricted counting (no one gets a disliked item). Total minus bad cases, with inclusion-exclusion for overlaps.

Traps

Using nPr when order does not matter (or the reverse).
Forgetting that identical items reduce the count: divide by the factorials.
Adding probabilities of events that are not exclusive.
In "without replacement" problems, forgetting that the sample space shrinks.

5. 📐 Geometry, Mensuration & Spatial Reasoning

Medium ●●12 PYQs →

One or two questions per paper use geometry or a spatial picture: areas of shapes, cutting or rolling a sheet, cubes, or paper folding. The figure is simple once you set up the lengths.

  • Triangles, similarity & angles. Angles in a triangle sum to 180°; an exterior angle equals the sum of the two opposite interior angles. A line parallel to the base cuts similar triangles: sides scale by k, areas by k², volumes by k³. If the apex is at height 2h and the cut is at height h from the base, the small triangle has ratio 1/2, area 1/4, so the trapezium has 3/4 and the ratio is 1 : 3. Pythagoras: a² + b² = c².
    → Sides × k, areas × k², volumes × k³.
  • Circles, areas & composite shapes. Circle: area πr², circumference 2πr. Sector = (θ/360) πr². A ring (annulus) has area π(b² − a²). Circles that fit across a ring have diameter b − a. A composite area is a sum or difference of simple pieces. A rectangle with a vertex on a square: use coordinates, or compare a triangle with half the rectangle.
    → Ring = π(b² − a²). Composite area = sum or difference of simple shapes.
  • Solids: volume, surface area & rolled sheets. Cube side a: V = a³, surface 6a². Cylinder: V = πr²h, curved surface 2πrh. Rolling a sheet a × b: the side that wraps becomes the circumference (so r = a/2π) and the other side is the height. Equal surface area to a cube means 6s² = a × b. Folding halves a dimension each time, so perimeters follow from the final rectangle.
    → Circumference = the edge that wraps. Compare with 6s² for the cube.
  • Paper folding & cutting. Unfold in reverse order: every cut or punch is mirrored across the fold line that made that layer. A fold along the vertical middle doubles the holes left-right; a second fold doubles them again top-bottom. Count: holes in the folded sheet × number of layers = holes in the unfolded sheet. Check symmetry at the end.
    → Unfold in reverse and mirror across each fold line.
  • Cubes, dice & painted cubes. A 3-D object cut into n × n × n cubes after painting the outside: 8 corners have 3 painted faces, 12(n − 2) edge cubes have 2, 6(n − 2)² face cubes have 1 and (n − 2)³ inner cubes have 0. Opposite faces of a standard die sum to 7. Removing a corner cube from a big cube leaves the surface area unchanged. A cube needs 3 cuts to become 8 equal pieces.
    → 8, 12(n−2), 6(n−2)², (n−2)³. Opposite faces of a die sum to 7.

Formulas

Similarity
sides × k; areas × k²; volumes × k³
Circle
A = πr²; C = 2πr; ring = π(b² − a²)
Cylinder and cube
V = πr²h; curved area 2πrh; cube: V = a³, S = 6a²
Rolled sheet a × b
wrapped side a = 2πr, height b
Painted cube n × n × n
3 faces: 8; 2 faces: 12(n − 2); 1 face: 6(n − 2)²; 0 faces: (n − 2)³
Die
opposite faces sum to 7

What GATE asks

  • ★★★Area ratio or area of a figure. Use similar triangles and square the ratio, or split into simple shapes.
  • ★★★Volume of a rolled or folded sheet. Identify which side becomes the circumference and which the height.
  • ★★★Paper folding, cuts and cubes. Unfold in reverse; mirror each cut across each fold line.

Traps

Rolling the wrong side: the edge that is brought together decides the circumference.
Forgetting that area scales by the square of the length ratio.
A fold along the middle halves one dimension only, not both.
Mixing the radius and the diameter inside a ring.

6. 🧩 Analytical & Logical Reasoning

High yield ●●●11 PYQs →

Family relations, directions, sets, seating and truth-telling puzzles show up every year. Every one is solved by writing the facts down in a diagram or a table instead of keeping them in your head.

  • Family relations & blood relations. Draw a family tree with gender and generation. Chains read left to right: "mother's brother" is a maternal uncle. A relation like "P is the brother of Q" fixes P as male but says nothing about Q. Check each claim: it is true only if the tree forces it, false if the tree forbids it, and otherwise cannot be determined (R has only one son? not stated).
    → Draw the tree; a statement is true only if it is forced.
  • Directions & distances. Start at the origin facing north. Each left or right turn changes the heading by 90°; a step forward adds to (x, y). The shortest distance from the start is √(x² + y²), and the direction of the final point is read from the signs of x and y (north-west if x < 0, y > 0). Facing a direction, left and right swap when you face south.
    → Track (x, y) and a heading. Distance = √(x² + y²).
  • Syllogisms & statement logic. Draw a Venn diagram for every premise and see whether the conclusion is forced. All A are B puts A inside B. Some A are B means at least one A in B. No A is B keeps them apart. A conclusion follows only if it is true in every diagram. Two statements cannot both be true if one makes the other impossible ("All students are inquisitive" vs "No student is inquisitive", with at least one student).
    → Conclusion must hold in every diagram.
  • Sets & Venn diagrams. |A ∪ B| = |A| + |B| − |A ∩ B|. For three sets: |A ∪ B ∪ C| = |A| + |B| + |C| − |A∩B| − |B∩C| − |A∩C| + |A∩B∩C|. Watch whether a given pair count includes the triple overlap ("40 in Drama and Dance" includes the 2 in all three, so only-Drama-and-Dance = 38). Total = (in at least one) + (in none).
    → Union = ΣA − ΣAB + ABC. Pair counts may include the triple.
  • Seating arrangements & ordering. Make a table or draw the circle, place the fixed facts first, then try cases. Around a circle with n people there are (n − 1)! arrangements once rotations are the same. "Left of" depends on which way people face (towards the centre: left = next person clockwise). Use the clues that give the most restrictions first (opposite, next to, not next to).
    → Circle: fix one person, (n − 1)!. Place the strongest clues first.
  • Coding-decoding & truth-teller puzzles. For codes, test: a fixed shift, reverse the word, reverse then shift (IMAGE → FHBNJ), a growing shift +1, +2, +3, or a mirror alphabet. Find the rule on the given pair, then apply it to the new word. For truth-teller puzzles, try each suspect and count the true statements against the stated total; the one that matches exactly is the answer.
    → Test a rule on the example. For puzzles, test each case and count.

Formulas

Two sets
|A ∪ B| = |A| + |B| − |A ∩ B|
Three sets
|A ∪ B ∪ C| = ΣA − ΣAB + ABC; total = union + none
Distance after a walk
d = √(x² + y²); start facing N, right turn: N → E → S → W
Circular seating
(n − 1)! arrangements; opposite of seat i is seat i + n/2
Truth-teller method
for each suspect, count true statements; keep the one that matches the given number
Code check
try shift, reverse, reverse + shift, growing shift, mirror alphabet

What GATE asks

  • ★★★Family relationship statements: which are true?. Draw the tree; a statement is true only if every tree forces it.
  • ★★★Who committed the crime / who is lying. Test every suspect and count true statements.
  • ★★★Seating around a table. Use the direct clues first; circle arrangements with a fixed person.
  • ★★★Sets and Venn diagram counts. Subtract the triple overlap from every pair count.
  • ★★★Coding of words. Find the rule on the example, then code the new word.

Traps

"Some" always includes the possibility of "all", but a conclusion must be certain, not possible.
A pair count in a Venn question may include the triple overlap.
Not stating gender: "brother" fixes one person only, the other can be anyone.
Left and right change with the direction a person faces.

7. 📊 Data Interpretation & Statistics

Medium ●●7 PYQs →

A pie chart, a bar graph or a table appears in many papers. The work is reading the data, converting percentages of a total, and avoiding the percentage versus percentage-point trap.

  • Reading tables, bar & pie charts. A pie chart slice is a fraction of the total: slice % × total gives the amount. Note the units on the axes and whether the total is the same across charts. To compare shares from two pie charts, compare percentages only if the totals are equal; otherwise compare actual amounts. Add the right slices (renewables = hydro + solar + wind).
    → Slice % × total = amount. Add the right slices.
  • Percentage change, growth & rates. Percentage change = (new − old) ÷ old. A rise from 40% to 65% of a fixed total is a 25-point rise but a 62.5% increase. Profit or loss over several years is the sum of revenues against the sum of expenses, expressed on the expenditure if that is what is asked. Compound growth: final = initial × (1 + r)ⁿ.
    → Percentage change ÷ OLD. Points ≠ percent.
  • Mean, median, mode & spread. Mean = sum/n, median = middle value of the sorted list (mean of the middle two for an even count), mode = most frequent. An outlier moves the mean a lot but the median little (9, 10, ..., 69: median 13.5, mean 18.7). Adding k to every value adds k to the mean and median and leaves the standard deviation unchanged; multiplying by c multiplies all three by |c|.
    → Sort first. Shift: SD same. Scale: SD scales.

Formulas

Share of total
amount = percent × total / 100
Percentage change
(new − old)/old × 100; percentage points = new % − old %
Profit or loss %
(revenue − expenditure) / expenditure × 100 (when asked on expenditure)
Mean, median
mean = Σx/n; median = middle of the sorted list
Shift and scale
x → x + k: mean + k, SD same; x → cx: mean × c, SD × |c|

What GATE asks

  • ★★★Read a pie chart and compute an amount. Add the right slices, multiply by the total, and divide by the unit value if needed.
  • ★★★Percentage increase between two years. Relative to the old value; watch for percentage points.
  • ★★★Median, mean or standard deviation facts. Sort for the median; know how shifting and scaling affect mean and SD.

Traps

Reporting percentage points when asked for percentage change.
Dividing by the new value instead of the old.
Comparing slices of two pie charts with different totals.
Forgetting to sort before taking the median.