1.2Transmission, propagation and queueing delay
The idea
Delay on a link has two parts: transmission delay Tt = L/B, the time to push all the bits of the packet onto the wire, and propagation delay Tp = d/v, the time for a bit to travel along it.
Think of it like this: Loading a train: Tt is how long it takes to load all carriages, Tp is how long the train takes to reach the next city.
Why it exists
Almost every numerical question in CN starts with these two numbers, and most mistakes are unit mistakes.
How it works
- Convert everything to bits, bits per second, metres and seconds.
- Tt = packet bits / bandwidth.
- Tp = distance / signal speed.
- Time to fully receive one packet = Tt + Tp. Queueing and processing are zero unless stated.
Worked example: 1000-byte packet on a 100 Mbps link to a satellite 2100 km away, signal speed 3 × 10⁸ m/s.
Tt = 8000 / 10⁸ = 0.08 ms, Tp = 2.1 × 10⁶ / 3 × 10⁸ = 7 ms. Total = 7.08 ms.
Now play with it
- →Use the calculator and double the bandwidth: only Tt changes.
- →Double the distance and watch a = Tp/Tt grow.
Defaults: 1000-byte packet, 100 Mbps, a satellite 2100 km away. The last bit leaves after Tt and then needs Tp to arrive.
Check yourself
Doubling the bandwidth of a link
Exam notes (the dense version)
Transmission delay Tt = L / B (packet size over bandwidth): the time to push all bits onto the wire. Propagation delay Tp = d / v (distance over signal speed, about 2×10⁸ m/s in cable and 3×10⁸ m/s in air or vacuum). Queueing and processing delay are zero unless the question says otherwise. Careful with units: 1 Kbps = 1000 bps in networking, but 1 KB = 1024 bytes in many GATE questions.
Previous year questions: Layering, Delays & Switching (7)
PYQs are grouped by topic, so this is the full set for Layering, Delays & Switching; try the ones that match this subtopic. Open all 7 on the topic page.