← 🧱 Layering, Delays & Switching
Subtopic 3 of 4

1.3Bandwidth-delay product and channel capacity

The idea

The bandwidth-delay product is bandwidth × delay: the number of bits that fit on the wire at once. Nyquist and Shannon give the maximum rate a channel can carry.

Think of it like this: A water pipe: bandwidth is how wide it is, delay is how long it is, and the product is how much water sits inside it.

Why it exists

It tells you how big a window must be to keep a link busy, and it appears directly as a numerical question.

How it works

  1. Compute bits in flight = B × RTT (or B × Tp one way).
  2. Nyquist (no noise): C = 2 H log₂ V.
  3. Shannon (noise): C = H log₂(1 + S/N), converting dB to a ratio with 10dB/10.
  4. Take the smaller of the two if both are given.

Worked example: H = 3 kHz, S/N = 30 dB.

S/N = 1000, so C = 3000 × log₂(1001) ≈ 29.9 kbps.

Now play with it

  • →Use the calculator: change dB from 30 to 40 and see Shannon move.
  • →Raise the signal levels V and see Nyquist climb but Shannon stay.
Bandwidth-delay product (bits)15000000
in bytes1875000
Nyquist 2 H log2 V (bps)12000
S/N ratio1000
Shannon H log2(1 + S/N) (bps)29901.679
Usable limit12000

The usable data rate is the smaller of the Nyquist and Shannon limits.

Check yourself

A 20 dB signal-to-noise ratio is a ratio of

Remember: BDP = B × RTT. Shannon needs the S/N ratio, not dB. Capacity is the smaller of Nyquist and Shannon.
Exam notes (the dense version)

The bandwidth-delay product B × RTT (or B × Tp for one way) is the number of bits "in flight" on a full pipe: it is the window size you need to keep the link busy. Capacity limits: Nyquist (noiseless) C = 2 · H · log₂ V bits/s for bandwidth H Hz and V signal levels; Shannon (noisy) C = H · log₂(1 + S/N), with S/N as a ratio (convert from dB: ratio = 10^(dB/10)). The smaller of the two bounds applies.

Previous year questions: Layering, Delays & Switching (7)

PYQs are grouped by topic, so this is the full set for Layering, Delays & Switching; try the ones that match this subtopic. Open all 7 on the topic page.