← 🧠 ALU, Datapath & Control Unit
Subtopic 2 of 9

5.2Key registers

The idea

A handful of special registers do the housekeeping: PC, IR, MAR, MDR, ACC, SP and the status flags.

Think of it like this: Like a clerk's tools: a bookmark (PC), the page being read (IR), a note of which shelf (MAR), a tray for the item (MDR).

Why it exists

Knowing who holds what lets you trace any instruction step by step.

How it works

  1. PC: address of the next instruction. IR: the current instruction.
  2. MAR: address sent to memory. MDR: data coming from / going to memory.
  3. ACC: results of the ALU. SP: top of the stack. PSW: condition flags (Z, C, S, V).

Worked example: Which register drives the address bus?

The MAR. The PC value is copied into MAR first.

Now play with it

  • →Step through and see which register lights up for each role.
PC100
MAR-
MDR-
IR-
ACC0
PSW (flags)-
SP9000
  • PC holds the address of the next instruction
  • MAR ← PC: MAR drives the address bus
  • MDR ← M[MAR]: MDR buffers data from/to memory
  • IR ← MDR: IR keeps the current instruction while it is decoded
  • PC ← PC + 1 (already pointing at the next instruction)
  • ALU result goes to ACC; condition flags to PSW
  • SP points at the top of the stack (PUSH/POP, CALL/RET)

Values shown are for an example LOAD at address 100.

Check yourself

Which register holds the address placed on the address bus for a memory access?

Remember: PC next, IR current, MAR address, MDR data.
Exam notes (the dense version)

PC next instr address · IR current instr · MAR address to memory · MDR data to/from memory · ACC, SP, PSW/flags (Z, C, S, V).

Previous year questions: ALU, Datapath & Control Unit (3)

PYQs are grouped by topic, so this is the full set for ALU, Datapath & Control Unit; try the ones that match this subtopic. Open all 3 on the topic page.