Subtopic 5 of 9
5.5Hardwired control
The idea
A hardwired control unit generates control signals with fixed logic gates driven by the opcode and a timing counter.
Think of it like this: A music box: the mechanism itself is the tune, very fast but cannot be changed.
Why it exists
No lookup is needed, so it is the fastest control design.
How it works
- The opcode is decoded.
- A step counter says which cycle (T1, T2...) we are in.
- AND/OR gates combine opcode, step and flags.
- The outputs are the control signals.
Worked example: ADD, step T3
Signals R2out and Yin fire in this step; the next step fires R3out, ADD, Zin.
Now play with it
- →Step through and follow the signal from IR to the control outputs.
IR (opcode)ADD
Decoder-
Step counter TT1
AND-OR logic-
Control signals-
- Opcode in IR drives the decoder
- Step counter (from clock) selects the current timing step
- Gates combine the decoded line, the T-step and flags
- Output = control signals (e.g. R2out, Yin), no memory lookup needed
- Next clock: T4 and a new set of signals
Hardwired: the logic itself is the control unit (fast, hard to change).
Check yourself
Which type of control unit is generally faster?
Remember: Hardwired = fast, rigid, used in RISC.
Exam notes (the dense version)
Control signals from logic gates / state counter. Fast, hard to modify, used in RISC.
Previous year questions: ALU, Datapath & Control Unit (3)
PYQs are grouped by topic, so this is the full set for ALU, Datapath & Control Unit; try the ones that match this subtopic. Open all 3 on the topic page.